RS PRO Single-Sided DIN 41612 Matrix Board FR2 with 1.02 mm Holes, 2.54 x 2.54 mm Pitch, 220 x 100 mm Choose this single-sided Eurocard matrix board from RS PRO when you need a low-cost prototype circuit board to securely layout your components. You can use it primarily to wire general discrete components, which you can find applied in amplifiers and electronic products using large amounts of current. It's also useful when you need to connect a number of common bus or signal lines. The board conforms to DIN 41494 standards specifying practices for electronic equipment and mechanical structures of 19-inch series, which means you can use it with the standard rack-based electrical systems and card frames. It's also compatible with Microbus backplane connectors. Matrix boards allow you to build a prototype PCB and keep all the parts of your circuit easily accessible. You can also use them as a pre-design layout matrix you can then copy onto a standard PCB. Features and Benefits - Synthetic resin bonded paper base material - DIN 41612 connection - Copper thickness of 35 um - Dimensions of 220 x 100 mm - FR2 material grade - Hole diameter of 1.02 mm - Hole pitch of 2.54 x 2.54 mm - Single-sided