1013-317 - Electric Vehicle Charge Point Adapter, CEE 7/3, Socket, IP54
Image is for illustrative purposes only. Please refer to product description.
1013-317 - Electric Vehicle Charge Point Adapter, CEE 7/3, Socket, IP54
Select attributes and click search to find other products that match your specification
Notes
Delivery Note
Kit contents: EVCA210 electric vehicle charge point adapter, Type 1 charging plug, Type 2 charging plug, soft case, instruction manual
Legislation and compliance
Article Information
The Megger EVCA210 Electric Vehicle Charge-Point Adapter simulates the connection of an electric vehicle to the charging point. The user triggers the simulated charging process by using the rotary switch to select either the Proximity Pilot (PP) or Control Pilot (CP) states. The adapter can be used with a single or multifunction tester and appropriate connectors to verify the functionality and safety of single- and three-phase electric vehicle charge points in accordance with IEC/ EN 61851-1 and IEC/ HD 60364-7-722.
Test instruments can be front-mounted to the Megger EVCA210 Electric Vehicle Charge-Point Adapter’s mains socket or via the 4mm connection ports, L1, L2, L3, N and PE. Additionally, the Megger EVCA210 Electric Vehicle Charge-Point Adapter includes CP signal terminals via which an oscilloscope can be connected, thereby allowing the user to measure CP signals.
- Fully test Mode 3 AC electric vehicle charge points
- Compliant with UK, European and other international wiring regulations
- Push-button for CP Error “E” and PE Error (Earth Fault) simulation
- Manual PE pre-test